由于产品型号众多，网站不能全部展示，请来电咨询！Ni102GB/T 13814: ENi2061AWS A5.11: ENi-1主要用于化工设备、食品工业、医疗器械制造用的镍基合金和双金属的焊接，也可用于堆焊过渡层，具有良好的融合性能和抗裂性。Ni112GB/T 13814: ENi2061A主要用于化工设备、食品工业、医疗器械制造用的镍基合金和双金属的焊接，也可用于堆焊过渡层。Ni207GB/T 13814:ENi4061AWS: ENiCu-7主要用于焊接蒙乃尔合金或异种钢的焊接，也可作为过渡层堆焊材料。ENiCrFe-1GB/T 13814: ENi6062AWS A5.11: ENiCrFe-1主要用于耐热耐蚀要求的镍基合金焊接及异种钢焊接。ENiCrFe-2GB/T 13814: ENi6133AWS A5.11: ENiCrFe-2主要用于Inconel600、Incoloy800等镍基、铁镍基合金、不锈钢、低合金钢相互之间的异种材料焊接。ENiCrFe-3GB/T 13814:ENi6182AWS: A5.11 ENiCrFe-3主要用于Inconel600、Incoloy800、Incoloy800H等镍基合金焊接，也可用于异种金属如不锈钢和高镍钢或其他低合金钢之间的焊接。ENiCrMo-3GB/T 13814: ENi6625AWS A5.11: ENiCrMo-3主要用于Inconel625、Incoloy800、Incoloy800H、Incoloy825等镍基合金焊接，铁镍基高温耐腐蚀合金的焊接。ENiCrMo-4GB/T 13814: ENi6276AWS A 5.11: ENiCrMo-4主要用于HASTELLOYC-276及其他镍基合金焊接、也可用于碳钢表面堆焊。ENiCrMo-5GB/T 13814: ENi6275AWS A5.11: ENiCrMo-5主要用于HASTELLOY C及其他镍基合金焊接、也可用于碳钢表面堆焊。ENiCrMo-6GB/T 13814: ENi6620AWS A5.11: ENiCrMo-6主要用于9Ni钢焊接。ENiCrCoMo-1GB/T 13814: ENi6117AWS A5.11: ENiCrCoMo-1主要用于Inconel600/601、Incoloy800H、Incoloy825等镍基合金及 HK40/HP40铁镍基高温耐腐蚀合金的焊接。

由于产品型号众多，网站不能全部展示，请来电咨询！ 型号 特性/用途   Ni1 ERNi-1Ni2061 焊接 200 、 201 镍合金以及镀镍钢板； - 钢与镍异种材料的焊接； - 钢的表面堆焊。 NiCu7 ERNiCu-7Ni4060 - 蒙乃尔 400 合金自身的焊接；以及蒙乃尔 400 合金与钢的焊接； - 用于钢的表面堆焊。 Ni82 ERNiCr-3Ni6082 用于镍铬合金、镍铬铁合金、镍铁铬合金的焊接，也可用于渡层与异种金属接头的焊接和低温条件下镍钢的焊接。 Ni62 ERNiCrFe-5Ni6062 用于镍铁铬合金、镍铬铁的焊接以及特殊用途的异种金属焊接。 Ni690 ERNiCrFe-7Ni6052 用于高铬镍基合金的焊接，也可用于低合金和不锈钢以及异种金属的耐腐蚀层的堆焊。主要应用于核电工程。 Ni690A ERNiCrFe-7A用于高铬镍基合金的焊接，也可用于低合金和不锈钢以及异种金属的耐腐蚀层的堆焊。主要应用于核电工程。 Ni825 ERNiFeCr-1Ni8065 用于铬镍钼铜合金、镍铁铬钼合金的焊接，也可用于钢材表面堆焊和镉离层堆焊。 Ni276 ERNiCrMo-4Ni6276 INCO-WELD C276 及其它 Ni-Cr-Mo 耐腐蚀合金的焊接； - 表面堆焊合金钢的焊接、钢的表面堆焊 Ni455 ERNiCrMo-7Ni6455 用于镍基、铁镍基合金及不锈钢等的焊接，也可用于镍基与铁镍基或不锈钢、镍基与不锈钢与低合金钢异种材料的焊接与堆焊。 Ni625 ERNiCrMo-3Ni6625 INCONEL625 、 INCONEL825 、 INCONEL25-6Mo 以及 MONEL400 合金的焊接； - 超高强度奥氏体钢与 INCOLOY020 合金之间的焊接； - 镍基合金与不锈钢异种材料间的焊接； - 钢的堆焊。 Ni686 ERNiCrMo-14Ni6686 INCONEL686 及其它 Ni-Cr-Mo 合金的焊接； - 表面堆焊合金钢、双相钢、超高强度双相钢、超高强度奥氏体不锈钢的焊接； - 钢的表面堆焊。 Ni617 ERNiCoCrMo-1Ni6617 用于低碳镍钴钼合金的焊接和钢表面堆焊，也可用于异种高温合金和铸造高镍合金的焊接。 铜镍焊条 ERCuNi 用于铜镍合金以及特定的青铜材料自身的焊接，以及这些材料和蒙乃尔 400 合金或 Nickel200 之间的焊接。 ERNiCrFe-3 ERNiCrFe-3 抗蠕变接头的焊接、异种材料焊接； - 奥氏体、铁素体钢和高镍合金的焊接、含镍 9% 合金钢焊接 ERNiCrMo-10 ERNiCrMo-10 INCONEL622 及其它 Ni-Cr-Mo 耐腐蚀合金的焊接； - 表面堆焊合金钢、双相钢、超高强度双相钢、超高强度奥氏体不锈钢的焊接； - 钢的表面堆焊。 

由于产品型号众多，网站不能全部展示，请来电咨询！Category类 别Trade-mark牌 号Chemicalcomposition化学成份(%)Hardness硬 度Application用 途Oxy-AcetyleneFlamespray-using 氧乙炔焰喷焊F103 Cr10 B1.5 Si3 Ni Rem. HRc 25 Spray-fusing of cast iron parts, such as die for glass, cylinder, and guide.铸铁件的喷焊，如玻璃模具，汽缸、导轨F101 Cr10 B2.5 Si3 Ni Rem. HRc 45 Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.耐磨、耐蚀件的喷焊，如阀门、泵转子、泵柱塞F101Fe Cr10 B2.5 Si3 Fe10 Ni Rem. HRc 45 Spray-fusing of corrosion-resistant parts, such as axle and stigma.耐磨件的喷焊，如轴类、汽门F102 Cr16 B4 Si4 Ni Rem. HRc 60 Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.耐磨、耐蚀、抗高温氧化工件的喷焊，如模具、柱塞F102Fe Cr16 B4 Si4 Fe15 Ni Rem. HRc 60 Spray-fusing of corrosion-resistant parts, such as axle and cold die.耐磨件的喷焊，如轴类、冷模具F105 F102+50%WC HRc 60 Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.抗磨粒磨损场合的喷焊，如导板、刮板、风机叶片F105Fe F102Fe+35%WC HRc 60 Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.抗磨粒磨损场合的喷焊，如导板、刮板、风机叶片F108 F102+80%WC HRc 60 Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.抗强烈磨粒磨损，无需加工场合的喷焊，如挖泥船耙齿F301 Cr5 B4 Si4 Ni30 Fe Rem. HRc 45 Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.农机,矿山机械易损件的喷焊，如齿轮，车轴Track iron powder 轨铁粉Cr5 B1.5 Si3 Ni30 Fe Rem. HRc 28 Repair spray-fusing of defects such as scratch and concavity of railroad track.铁路钢轨擦伤、低塌等缺陷的修复喷焊Oxy-acetylene flame spraying 氧乙炔焰喷涂F111 Cr5 B1.5 Si3 Ni30 Fe Rem. HB 150 Spraying of bearing and cutting parts etc.轴承、切削件等的喷涂F113 Cr10 B1.5 Si3 Ni Rem. HB 250 Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.喷涂亦可喷焊，如滚筒、柱塞、耐蚀耐磨轴等F313 Cr15 B1.5 Fe Rem. HB 250 Spraying of dryer of papermaking and axle.造纸烘缸、轴类的喷涂F314 Cr18 Ni9 B1.5 Fe Rem. HB 250 Spraying of axle.轴类喷涂F412 Sn10 P0.3 Cu Rem. HB 80 Spraying of axle and bearing.轴、轴承的喷涂F512 复合Al5Ni95 Backing spray of transition layer between base and working layer.喷涂层的基体与工作层之间过渡（打底）层用喷涂PTA hardfacing 等离子弧喷焊F221 Cr26 W5 B0.7 Co Rem. HRc 43 PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.高温高压阀门密封面、热剪切刃口的等离子喷焊F223 Cr21 W5 B1.5 Co Rem. HRc 40 PTA hardfacing of parts resistance to wear and corrosion at high  temperature, such as valve under high temperature and high pressure, and blower.高温下耐磨耐蚀件的喷焊，如高温高压阀门、鼓风机F321 Cr13 B1.5 Si1 Fe Rem. HRc 45 PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.中温中压阀门的闸板及其他耐磨件的等离子喷焊F322 Cr23 Ni13 Si5 B1 Fe Rem. HRc 40 PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.中温中压阀门的阀座及其他耐磨件的等离子喷焊F422 Sn10 P0.3 Cu Rem. HB 80 PTA hardfacing of axle and bearing etc.轴、轴承等离子喷焊Category类 别Trade-mark牌 号Chemicalcomposition化学成份(%)Hardness硬 度Application用 途Oxy-AcetyleneFlamespray-using 氧乙炔焰喷焊F103 Cr10 B1.5 Si3 Ni Rem. HRc 25 Spray-fusing of cast iron parts, such as die for glass, cylinder, and guide.铸铁件的喷焊，如玻璃模具，汽缸、导轨F101 Cr10 B2.5 Si3 Ni Rem. HRc 45 Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.耐磨、耐蚀件的喷焊，如阀门、泵转子、泵柱塞F101Fe Cr10 B2.5 Si3 Fe10 Ni Rem. HRc 45 Spray-fusing of corrosion-resistant parts, such as axle and stigma.耐磨件的喷焊，如轴类、汽门F102 Cr16 B4 Si4 Ni Rem. HRc 60 Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.耐磨、耐蚀、抗高温氧化工件的喷焊，如模具、柱塞F102Fe Cr16 B4 Si4 Fe15 Ni Rem. HRc 60 Spray-fusing of corrosion-resistant parts, such as axle and cold die.耐磨件的喷焊，如轴类、冷模具F105 F102+50%WC HRc 60 Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.抗磨粒磨损场合的喷焊，如导板、刮板、风机叶片F105Fe F102Fe+35%WC HRc 60 Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.抗磨粒磨损场合的喷焊，如导板、刮板、风机叶片F108 F102+80%WC HRc 60 Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.抗强烈磨粒磨损，无需加工场合的喷焊，如挖泥船耙齿F301 Cr5 B4 Si4 Ni30 Fe Rem. HRc 45 Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.农机,矿山机械易损件的喷焊，如齿轮，车轴Track iron powder 轨铁粉Cr5 B1.5 Si3 Ni30 Fe Rem. HRc 28 Repair spray-fusing of defects such as scratch and concavity of railroad track.铁路钢轨擦伤、低塌等缺陷的修复喷焊Oxy-acetylene flame spraying 氧乙炔焰喷涂F111 Cr5 B1.5 Si3 Ni30 Fe Rem. HB 150 Spraying of bearing and cutting parts etc.轴承、切削件等的喷涂F113 Cr10 B1.5 Si3 Ni Rem. HB 250 Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.喷涂亦可喷焊，如滚筒、柱塞、耐蚀耐磨轴等F313 Cr15 B1.5 Fe Rem. HB 250 Spraying of dryer of papermaking and axle.造纸烘缸、轴类的喷涂F314 Cr18 Ni9 B1.5 Fe Rem. HB 250 Spraying of axle.轴类喷涂F412 Sn10 P0.3 Cu Rem. HB 80 Spraying of axle and bearing.轴、轴承的喷涂F512 复合Al5Ni95 Backing spray of transition layer between base and working layer.喷涂层的基体与工作层之间过渡（打底）层用喷涂PTA hardfacing 等离子弧喷焊F221 Cr26 W5 B0.7 Co Rem. HRc 43 PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.高温高压阀门密封面、热剪切刃口的等离子喷焊F223 Cr21 W5 B1.5 Co Rem. HRc 40 PTA hardfacing of parts resistance to wear and corrosion at high  temperature, such as valve under high temperature and high pressure, and blower.高温下耐磨耐蚀件的喷焊，如高温高压阀门、鼓风机F321 Cr13 B1.5 Si1 Fe Rem. HRc 45 PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.中温中压阀门的闸板及其他耐磨件的等离子喷焊F322 Cr23 Ni13 Si5 B1 Fe Rem. HRc 40 PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.中温中压阀门的阀座及其他耐磨件的等离子喷焊F422 Sn10 P0.3 Cu Rem. HB 80 PTA hardfacing of axle and bearing etc.轴、轴承等离子喷焊